Page 4
Rev. 01-21-21
www.SullivansUSA.net
INSTRUCTIONS
1
THE TABLE TOP
Parts Needed: J, P, #2-(8), #4-(16), #8-(4), #12-(9), #18-(4), #22, Phillips Screwdriver (not included)
1A
Lay 2 Table Top Boards (J & P) on a clean surface with the grid facing
down. Line up holes on the boards as shown.
Align 4 Hinges (#8) over the center predrilled holes and then secure
each using 16 Screws (#4) and the Allen Key (#22).
1B
Use 8 Screws (#2) and Screwdriver to fasten 4 Magnets (#18) to the
table top. The metal bars face in the direction of arrows in
Step 1D.
1C
For the remaining 9 pre-installed plastic holes in Table Top (J), use a
Screwdriver to attach 9 Cam Bolts (#12).
Leave the Table Top flat
when complete.
1D
1A
#4
#22
#8
1B
#2
#18
1C
1D
#12
STOP
DO NOT RETURN TO THE STORE.
For assistance with missing or replacement parts,
installation, or any additional information, please call Sullivans USA at
800-862-8586
or email us at
REPLACEMENT POLICY:
Sullivans USA, Inc. will replace any missing or defective parts within 30 days of
purchase. Fax a dated receipt with your contact information, the lot number on your instructions, and your
request to
630-435-1532
or e-mail to
To expedite this process, include any parts
you may need in your request. This policy does not apply to damages due to shipping. For further assis-
tance, please call toll-free
800-862-8586.
Please note that the no-charge Replacement Policy does not apply to items sold as is, clearance, closeout,
final sale, etc. Any parts requested under these circumstances will be charged to the customer, including
shipping charges. Shipping charges for replacement parts to Alaska, Hawaii or any point outside of the
Contiguous United States are not covered under our policy. Some restrictions apply. See website for
details. If you are outside of the 30 day period, replacement parts are available for purchase.