Sullair SXCS User Manual Download Page 38

Page: 38 / 52

User Manual | US-EN

COALESCING FILTERS

02250247-389 R02

Subject to EAR. EAR99 and related export control restrictions.

9.5 Exchange the filter element

The following requirements must be fulfilled to exchange the filter element and preparatory work must be completed.

Preconditions

Tool

Material

Protective equipment

• Screwdriver - Philip's head size 0.10

inch (2.5 mm)

• New filter element

•

Protective gloves (liquid-

resistant)

•

Safety glasses with side

protection (goggles)

•

Hearing protection

•

Class FFP 3 respirator

•

Safety shoes

Preparatory work

Open any bypass lines

Picture

Description

1. Close the shut-off valves upstream and downstream of

the filter or relevant system section and depressurize

filter

2. If using the SULLIMAX

™

, it must be separated from

the bottom section of the filter.

For further information, see the attached installation and

operating instructions for the SULLIMAX

™

Summary of Contents for SXCS





















































Search results

Summary of Contents for SXCS

Reviews:

Related manuals for SXCS

Brands by name

Popular brands

Sullair SXCS, User Manual

Search results

Summary of Contents for SXCS

Reviews:

Related manuals for SXCS

Brands by name

Popular brands