SN55, SN55S, SN55V, SN75, SN75S, SN75V User Manual
5: Controller
02250247-571 R04
Subject to EAR, ECCN EAR99 and related export control restrictions.
64
5.2
Home page
For a complete overview of the controller, see the
Sullair
Touch Screen (STS) Controller User Manual
(P/N
02250241-178 R00) for more information.
The
Analog/Digital Panel
screen is the default screen
for the home page. This screen is divided into two main
sections:
• The status area at the top shows the load and
run times, starts and cycles, and message
related to the current status (state and mode).
• The gauge area below shows discharge tem-
perature, discharge pressure, and sump pres-
sure as analog gauges.
You can change the units of measure for pressure and
temperature on the
User Preferences
page (see
Section
5.4
on page 66).
You can access the
User Preferences
page by pressing
the main menu button in the lower left corner of the
screen, then selecting
System Information
, and then
selecting
User Preferences
. (See
Section 5.5: Menu
hierarchy
on page 67 for the complete menu structure.)
Figure 5-2: Home page—Analog/Digital Panel screen (default)
1. Main menu button (red square)