USER MANUAL
Models SD-820 to SD-1710 with DDS
Rev 04 – October 2005
2
1.2.1 P
RESSURE
V
ESSEL
R
EGULATIONS
The pressure vessels are designed and built to meet the American Society of
Mechanical Engineers (ASME) standards. They fulfill the test of the certifying procedure
and carry the ASME symbols
U
or
UM
.
RANGE OF APPLICATION
Design Pressure
Max: 150 psig
Design Temperature
Max: 500 °F (260 °C)
Min: -20 °F (-29 °C)
1.2.2 L
EAK
T
EST
Each Sullair adsorption dryer is subjected to, and must pass, a leak test prior to
shipment.
1.3 SAFETY INSTRUCTIONS
This manual contains basic tips which must be followed during set-up, operation and
servicing. It is of utmost importance that it be read by the assembly technician before
installation and start-up as well as by the specialist/operator in charge. It must always
be within reach at the place where the adsorption dryer is being used.
1.3.1 I
DENTIFICATION OF
S
IGNS AND
S
YMBOLS IN THIS
M
ANUAL
The safety tips contained in this manual, whose disregard could endanger people and
equipment, are indicated by a general danger sign and the additional markings
Danger!
or
Attention!
or
Warning!
Danger! / Attention!
Safety sign in accordance with DIN 4844 - W9
Warning – high voltage!
Safety sign in accordance with DIN 4844 - W8
Safety tips printed directly on the adsorption dryer must be heeded at all times and must
be kept completely legible.
Summary of Contents for SD-1050 Series
