Sullair 1107e, Operators Manual And Parts Lists

Page: 81 / 102

7.13 CONTROL SYSTEM AND ELECTRIC PARTS — VSD (CONTINUED)
Key Description Part Number Note Quantity
1 switch, differential pressure 20psid 12ft or 02250050–154 1
2 tube, nyl .25 od x 040w blk(ft) 02250054–861 1
3 grip, cord n4 .125–.187 x 1/2” 02250071–379 (III) 2
4 grip, cord n4 .187–.250 x 1/2” 02250071–380 (III) 1
5 grip, cord n4 .250–.375 x 1/2” 02250071–381 (III) 2
6 switch, vacuum 22'wc n4 6ft cable 5a 02250078–249 1
7 nameplate, e–stop 45mm yellow 02250081–473 1
8 switch, push–button operator e22 40mm 02250085–504 1
9 bar, ground 5 post cutler hammer 02250101–721 2
10 block, pwr distr 600a 02250145–195 (IV) 1
11 control, display s4 02250154–051 1
12 control, i/o mod ws 24vdc supply 02250154–052 1
13 decal, microprocessor overlay 02250154–359 1
14 transducer, pressure 0–250# ratiometric 02250155–174 2
15 probe, rtd 100 ohm plat 3.5”x6ft 02250155–175 1
16 specification, encl 2200v 19” x 24.5” x 7 02250155–766 1
17 wire, 10 gauge ground bond 12” m8 02250157–450 1
18 receptacle, s4 program port nema 6p 02250159–547 1
19 cap, s4 program port nema 6p 02250159–549 1
20 spacer, p8/p12 ws mtg to encl 02250161–759 1
21 circuit breaker, 100–Amp HMCP 250014–827 (IV) 1
22 conn, 1/4” tube x 1/8” npt 250018–427 1
23 elbow, 90 1/4” tube x 1/8” npt 250018–429 3
24 holder, fuse ktk–r 3 pole 250019–773 1
25 connector, cord grip 0.09–0.26 250023–496 1
26 elbow, 90 deg m swvl 1/4t x 1.8 npt 250025–849 1
27 connector, male 1/4 tube x 1/8 250025–858 1
28 block, contact 1 nc 250027–125 1
29 fitting, compress adj 250028–635 1
30 nut, hex metric m8 x 1.25 825908–125 6
31 washer, spr lock–metric pltd m8 838808–200 6
32 tubing, st stl 1/4” 20 ga 841215–004 1
33 lug, scrulug kpa–25 4–1/0 849215–025 1
34 terminal, ring tng 3/8 x 8ga 849306–008 1
35 washer, metric–iso7089–8 865408–170 6
36 starter. ac – (I) 1
37 supply, power – (I) 1
38 VSD – (I) 1
PARTS LISTS
®
SULLAIR
®
1100e, 1500e, 1800e Operator’s Manual and Parts List
77