Installation
9
Fig. 6 – MFS bracket
Sioux
1. Bolt Sioux brackets to Spredway cone straps with
5/16" bolts.
2. Lower Spredway into fill ring*. Ensure Spredway is
level. Mark and drill 5/16" holes. Bolt Spredway into
place.
3. Use optional vertical brackets if required. If pre-
spread funnel is used, use longer vertical brackets.
See Fig. 5.
MFS
1. Bolt brackets to Spredway cone straps with 5/16" bolts.
2. Lower assembled Spredway into opening*. Level Spredway. Mark and drill 5/16" holes for mounting
bolts. Bolt brackets to fill ring.
3. Use optional vertical brackets if required. If pre-spread funnel is used, use longer vertical brackets. See
table below.
*If bin’s fill ring is too small for Spredway to fit through, use a winch to raise it from inside of bin.
REF. #
DESCRIPTION
QTY.
COMP. #
1
Sioux bracket (3)
1 set
G0130A
2
Vertical bracket 7" long (3)
" " 18" long (3)
1 set
1 set
G0132A
G0137A
3
Bolt, 5/16 - 18 x 1”, PLT
12-18 J0527
4
Lock washer, 5/16"
12-18 J1200
5
Nut, 5/16” - 18, PLT
12-18 J1002
REF. #
DESCRIPTION
QTY. COMP. #
1
MFS bracket, 32" (3)
1 set
G0126A
MFS bracket, 40" (3)
1 set
G0127A
MFS bracket, 60" (3)
1 set
G0128A
2
Vertical bracket, 7" Long (3) 1 set
G0132A
" " 18" Long
1 set
G0137A
3
Bolt, 5/16 - 18 x 1”, PLT
9-15
J0527
4
Lock washer, 5/16"
9-15
J1200
5
Nut, 5/16” – 18, PLT
9-15
J1002
Fig. 5 – Sioux bracket
