Programmable DC Power Supply User’s Guide
16
1.
Set the state to be saved
2.
Press [Save] to enter the Save interface
3.
Input the group number (1-5) through the numeric keys.
4.
Press [Enter] to finish saving, and [Cancel] to cancel saving
Recall Settings
：
1.
Press the [Recall] to enter the recall interface
2.
Input the group number (1-5) through the numeric keys to confirm which set of
parameters to recall
3.
Press [Enter] to complete the call out and [Cancel] to cancel the call out
2.5.11 Key lock and unlock
Press the [lock] key to lock the keyboard, at this time other keys don’t work except for the
[Shift] + [7] (Unlock) combination key operation. You can unlock the keyboard by
pressing [Shift] + [7](Unlock).
2.5.12 Remote control mode On/Off
After the power supply successfully receives any programmable command, instrument
will enter program control mode automatically. In this mode, except [Local] and [Beep]
keys, other keys will not work. Press [Local] to exit the remote control mode.
2.6 System auxiliary function
Press
【
Utility
】
to show the following interface, and select the function by pressing up
and down direction keys. Press
【
Enter
】
or
【
Utility
】
key to enter or exit.
