7
3. Connecting to a power source
4. Trial operation
∆
Note:
Do not connect any other electrical appliance to the same power source that the unit is connected to.
∆
Note:
When you turn off the “COOL” airflow (the compressor) with the power switch and change it to “STOP”
or “AIR”, wait at least 3 minutes before turning the switch back to “COOL” again.
Turn on the power switch, the airflow adjustment switch and the
swivel switch to make sure that everything works properly.
I.
The properties of all the switches are explained further in the
next section “How to use“.
II.
If the unit does not work properly, please consult page 13
“Trouble shooting“ for further guidance.
(1) Electrical wiring
Make sure that no other electrical appliance is connected do the
same power source as the unit.
(2) The circuit breaker
Use a 10A, 30mA ≤0.1sec. circuit breaker.
(3) Connecting the unit to a power source
Insert the plug into the power source.
Service box
Cord clamp
Earthing
Electric cord
Plug