Suiden SS-22DD-8A Instruction Manual Download Page 15

14

10 After service and warranty

Caution

Please use standard parts for maintenance and repair.

 

*

If you use spare parts other than standard parts, there is risk that they will not fit properly and can cause 
malfunction or accidents

.

 

*

If a warranty claim occurs for a unit that has unauthorized spare parts, we will not be able to accommodate 
that request, and also the whole warranty will become invalid

.

 

*

The same condition applies also to the case if Suiden spare parts are used in products from other compa

-

nies

.

 

Repair

For questions regarding acquiring spare parts or regarding repair, please contact the store where you purchased the 
unit, after having prepared the product number, the manufacturer’s serial number and the date of purchase.

For your safety

 

*

If you intend to use the unit to preserve food products, animals and plants, precision machines, art objects 
etc., please check the specific requirements of those objects carefully before you commence. Inaccurate or 
inappropriate use can cause the quality of the objects to deteriorate

.

 

*

Sometimes it will be necessary to perform installation work and electric work to the unit. In these cases, contact 
your local dealer or an experienced professional. If the works are performed inadequately, there is risk 
of electric shock, fire or accidents.

 

Warranty

This warranty period for this unit is one year from delivery date, given that the following conditions are filled.

C

o

n

d

it

io

n

s

The warranty is valid for units that have malfunctioned or have broken down, within 

the warranty period, because of deficiencies in design, parts or assembly made by our 

company, and that has not been able to be resolved by following the instructions on safety 

inspection and trouble shooting in this instruction manual.

However, the warranty does not cover costs or other losses that may occur as a result of 

malfunction or breakdown of the unit.

Further, change of worn-out parts are not covered by the warranty, even if the parts 

become worn out within the warranty period, and also without regard to whether they have 

caused malfunction or not.

Summary of Contents for SS-22DD-8A
















Reviews: