a
sseMbly
/
dIsasseMbly
oF
the
sensor
caM
Move the pinion of the machine to absolute zero. Ensure
that the machine is switched off and secured against re-
starting.
Remove cap screw.
Fix the proximity switch to the plate with two screws.
Screw the plate with the proximity switch to the machine
using the cylinder screw and the sleeve. Ensure that the
plate is aligned parallel to the machine.
Carefully slide the plate over the pinion.
Ensure that there is no contact between the plate and the
machine and that the minimum distance is maintained.
Fix the plate with the two screws.
8
