SUHNER ABRASIVE WB 10, Technical Document

Page: 23 / 64

CN
PL
CZ
FI
SE
NL
PT
ES
IT
(2) and secure with setscrew.
Dismantling the belt grinding attachment according to
Sec. 2.1.3.
Optimize the grinding belt tension with hexagon spanner
and mount the belt grinding attachment again.
Let the tool run without load for at least thirty seconds.
2.1.3 r
eplAcing
/
cOnnecting the Belt grinding AttAchment
Attach the belt grinding attachment to the drive at the po-
sition you want, and tighten the screw.
2.1.4 r
eplAcing
/
cOnnecting the cOntAct Arm
Loosen the knurled nut. Replace the contact arm, and
retighten the knurled nut.
2.1.5 r
eplAcing
/
cOnnectiOn the cOntAct rOller
2.2 r
Ating dAtA
Connection G28
Maximum speed
17'100min
-1
Vibration EN 60745 2.5m/s
2
, K=1m/s
2
Weight 1.200kg
Grinding belt and non woven:
Belt length
520mm / 20,5"
Belt width 3-13mm / 1/8"-1/2"
Belt thickness up to 4mm
Belt tension 40-90N
Belt speed 27m/s
Drive roller Ø 30mm
The specified vibration value was measured with a
standardised test method and may differ from the
actual operating value. The specified value can be
used for product comparisons or for an introductory as-
sessment of work breaks.
2.3 O
perAting cOnditiOns
FR
DE
23
EN