3
Install as shown
Upper track
9HUL¿FDWLRQ%HIRUH,QVWDOOLQJ6RIW&ORVHU
3
Mounting of Upper Track
５
(Recommended screw: Countersunk head tapping screw 3.5x25)
loosen
inclined
overtightened
deeper groove
OK
Be careful not to overtighten the screws and screw
heads protruding on upper track.
It may cause deformation of track or damage of
soft closer.
CAUTION
４
Inserting Parts into Upper Track
Insert the parts in order from
❶
to
❷
with
care of direction.
1 2
Remove any dirt or aluminum
chips from the track.
Tape around rollers and upper
track to prevent the inserted
parts from falling.
CAUTION
:LWKRXWYHUL¿FDWLRQWKHVHOIFORVLQJIHDWXUHPD\IDLO
CAUTION
Soft closer
1
2
Upper track
Sticker
Cut end
Upper roller
Leading edge
Trailing edge
Correct set position
Improper set position
Trigger catcher
(Red colored part)
Correct set position
OK
If the trigger position is wrong, pull back the trigger
catcher to the correct position using a 6mm diameter
round bar.
Trigger catcher
(Red colored part)
I
6
