42
5. Check if optical fiber broken or not.
6. Replace lamp if solution above not work
If individual light shade not in the rage.
Red-light:2.0-4.5;
Purple-light: 1.0-4.5
1. Clean optical fiber ends inside test channel.
2. Remove fiber from test channel; clean both ends with
lens paper.
3. Check if optical fiber is broken or not.
“ Max” result
1.
Rinse, clean probes in software, make liquid full
of pipeline.
2.
Check liquid level sensor function/ sensitivity
3.
Clean probe inside, test liquid spray function
4.
Relocate probes to incubation area and test area
5.
Check pipeline, confirm no bubble inside, no error
in pipeline system
6.
Check inflow pipe can immerse/touch into SFW
cleaning solution
7.
Check sample volume accurate or not.
8.
Replace with new “Small magnetic-test board”
when test cannot stopped.
“ 4.0” result
1.
Change new cuvette
2.
Clean probe inside, test liquid spray function
3.
Relocate probes to incubation area/test area
4.
Check liquid level sensor function/ sensitivity
5.
Replace new “ magnetic test board”
6.
Rinse, clean probes in software, make liquid full
of pipeline.
7.
Check whether there is liquid/air leakage from
micro-syringe/micro-injector
Too many repeatability test
1.
Relocate probes to incubation area/test area
2.
Check liquid level sensor function/ sensitivity
3.
Clean probe inside, test liquid spray function
4.
Workbench not flat enough
Clean system
Liquid comes out from cleaning position when cleaning
1.
Check outflow pump connection
2.
Replace outflow pump
Liquid drips on the probe point.
1. Confirm no seal of pipeline system
2. Replace with new injector or magnetic valve
Click rinse, cleaning liquid cannot be filled with
pipeline.
Reconnect or replace new pipeline.
Replace inflow pump
Liquid backflow of pipeline
1.
Press “ manual inflow button” , and try to drain
again
2.
Re-connect or replace pipeline system
3.
Replace new one-way-valve
Communication system
VSPM error
Cannot create, or are being used.
Close using comport, use “ vspmctl” to close VSPM
service, and restart VSPM service