Subtronic Pro 160 Fusion User Manual Download Page 16

WARRANTY

1. The warranty conditions apply exclusively to purchases made in the Federal Republic of 

Germany.

2. The warranty stipulations of the respective country or the warranty conditions of the vendor 

apply to purchases made abroad.

3. The warranty period begins with the conclusion of the purchase agreement or on the date of 

delivery of the device to the purchaser (consumer).

4. We grant a function and impermeability warranty for a period of 24 months on devices 

supplied by subtronic. Excluded Accumulators ( Warranty 6 Month )

5. The function and impermeability warranty shall become void, however, in the event of 

damage caused by an accident or by the device being dropped, if the device is opened, in the 
event of negligence or improper usage, in particular with regard to damage to the cabling 
and   water   penetration   at   improperly   fastened   screw   connections,   in   the   event   of   non-
observance   of   the   operating   conditions,   or   in   the   event   of   failure   to   comply   with   the 
operating manual. Improper handling and intervention by the purchaser or a third party shall 
exempt subtronic from all warranty obligations and all other claims. 

6. Under   the   terms   of   the   warranty,   devices   that   become   defective   as   the   result   of   an 

acknowledged manufacturing or material defect shall either be repaired free of charge or 
replaced should the repair costs be disproportionately high. A more extensive liability is 
excluded.  

subtronic

  shall  not  be liable for  

indirect damages

  and reserves  the right  of 

decision with regard to repairs or replacement. The provision of warranty services shall not 
represent a reason for either extending the warranty period or granting a new warranty period 
for the replaced or repaired parts.

7. Furthermore, wear and tear, usage, as well as excessive use, are likewise excluded from this 

warranty. The following parts are covered by the aforementioned stipulation: Flashtubes, 
accumulators, socket contacts, connecting cables. The accumulators used by our company 
are subjected to a multi-stage selection process, and the capacity of the accumulators is 
verified several times prior to delivery. We shall not provide any services under the terms of 
this warranty for accumulators that have been improperly used, e.g. storage in a discharged 
condition, or long storage periods without charging resulting in exhaustive discharging.

8. Please return faulty devices either to your specialist retailer or directly to subtronic GmbH 

together with the proof of purchase, in transport-proof packaging, and accompanied by a full 
and accurate description of the complaint. Devices are sent by, and returned to, the purchaser 
at own risk.

subtronic GmbH  Weilheim  a. d. Teck                         

Device number 

Sales date

Retailer stamp 

16

Summary of Contents for Pro 160 Fusion





















Reviews: