background image

.

WARRANTY

1. The   warranty   conditions   apply   exclusively   to   purchases   made   in   the   Federal 

Republic of Germany.

2. The warranty stipulations of the respective country or the warranty conditions of the 

vendor apply to purchases made abroad.

3. The warranty period begins with the conclusion of the purchase agreement or on the 

date of delivery of the device to the purchaser (consumer).

4. We   grant   a   function   and   impermeability   warranty   for   a   period   of   24   months   on 

devices supplied by subtronic. Excluded Accumulators ( Warranty 6 Month )

5. The function and impermeability warranty shall become void, however, in the event 

of damage caused by an accident or by the device being dropped, if the device is 
opened, in the event of negligence or improper usage, in particular with regard to 
damage   to   the   cabling   and   water   penetration   at   improperly   fastened   screw 
connections, in the event of non-observance of the operating conditions, or in the 
event   of   failure   to   comply   with   the   operating   manual.   Improper   handling   and 
intervention   by   the   purchaser   or   a   third   party   shall   exempt   subtronic   from   all 
warranty obligations and all other claims. 

6. Under the terms of the warranty, devices that become defective as the result of an 

acknowledged   manufacturing   or   material   defect   shall   either   be   repaired   free   of 
charge   or   replaced   should   the   repair   costs   be   disproportionately   high.   A   more 
extensive liability is excluded.  

subtronic

  shall not be liable for  

indirect damages 

and   reserves   the   right   of   decision   with   regard   to   repairs   or   replacement.   The 
provision of warranty services shall not represent a reason for either extending the 
warranty period or granting a new warranty period for the replaced or repaired parts.

7. Furthermore, wear and tear, usage, as well as excessive use, are likewise excluded 

from   this   warranty.   The   following   parts   are   covered   by   the   aforementioned 
stipulation:   Flashtubes,   accumulators,   socket   contacts,   connecting   cables.   The 
accumulators   used   by   our   company   are   subjected   to   a   multi-stage   selection 
process,   and   the   capacity   of   the   accumulators   is   verified   several   times   prior   to 
delivery. We shall not provide any services under the terms of this warranty for 
accumulators   that   have   been   improperly   used,   e.g.   storage   in   a   discharged 
condition,   or   long   storage   periods   without   charging   resulting   in   exhaustive 
discharging.

8. Please return faulty devices either to your specialist retailer or directly to subtronic 

GmbH   together   with   the   proof   of   purchase,   in   transport-proof   packaging,   and 
accompanied by a full and accurate description of the complaint. Devices are sent 
by, and returned to, the purchaser at own risk.

subtronic GmbH  Weilheim  a. d. Teck                         

Device number 

Sales date

Retailer stamp 

Page 19 of 20

Summary of Contents for Nova





















Reviews: