Subtech DrainCam Mini ST 5500, User Manual

Page: 3 / 21

General Safety Precautions
People who use hand and power tools and who are exposed to the hazards of falling, flying, abrasive and splashing objects,
or exposed to harmful dusts, fumes, mists, vapors or gases, must be equipped with the appropriate personal protective
equipment (e.g.,safety goggles, gloves, appropriate safety footwear Ect.). The work area should be kept as clean and dry as
possible to prevent accidental slips. All electrical connections for these tools must be suitable for the type of tool and
working conditions (wet, dusty, Flammable vapors).
Power Tool Precautions
Power tools can be hazardous when improperly used. The following general precautions should be observed by power tool
users:
•
Operate electric tools within their design limitations.
•
Use gloves and appropriate safety footwear when using electric tools.
•
Store electric tools in a dry place when not in use.
•
Do not use electric tools in damp or wet locations unless they are approved to for that purpose.
•
Keep work areas well lighted when operating electric tools.
•
Ensure that cords from electric tools do not present a tripping hazard.
•
Never carry a tool by the cord or hose.
•
Never yank the cord or the hose to disconnect it from a receptacle.
•
Keep cords and hoses away from heat, oil and sharp edges.
•
Disconnect tools when not in use., before servicing or cleaning and when changing accessories.
•
Keep all people not involved with the work at a safe distance away from the work area.
•
Maintain tools with care. Tools should be kept clean for best performance.
•
Follow instructions in the user’s manual for changing accessories.
•
Be sure to keep good footing and maintain good balance when operating power tools.
•
The proper apparel should be worn. Loose clothing, ties, hair or jewelry can become caught in moving parts.
•
Remove all damaged electric tools from use and tag them “ DO NOT USE”.
•
Turn off the power when not in use.
Five Basic safety rules can help
•
Keep all tools in good condition with regular maintenance.
•
Use the right tool for the job.
•
Examine each tool for damage before use and do not use damaged tools.
•
Operate tools according to the manufacture’s instructions.
•
Provide and properly use the correct protective equipment.