Subaru ROBIN PUMP PKV401T Instructions For Use Manual Download Page 9

2

ENGLISH

FRANÇAISE

ESP

AÑOL

: EXHAUST PRECAUTIONS

 

Never inhale exhaust gasses.
They contain carbon monoxide, a colorless, odorless and extremely dangerous gas
which can cause unconsciousness or death.

 

Never operate the pump indoors or in a poorly ventilated area, such as tunnel, cave,

etc.

 

Exercise extreme care when operating the pump near people or animals.

 

Keep the exhaust pipe free of foreign objects.

: REFUELING PRECAUTIONS

 

Gasoline is extremely flammable and its vapors can explode if ignited.

 

Do not refuel indoors or in a poorly ventilated area.

 

Be sure to stop the pump prior to refueling.

 

Do not remove fuel tank cap nor fill fuel tank while engine is hot or running.
Allow engine to cool at least 2 minutes before refueling.

 

Do not overfill the fuel tank.

 

If fuel is spilt, wipe it away carefully and wait until the fuel has dried before starting the

engine.

 

After refueling, make sure that the fuel cap is secured to prevent spillage.

: FIRE PREVENTION

 

Do not operate the pump while smoking or near an open flame.

 

Do not use around dry brush, twigs, cloth rags, or other flammable materials.

 

Keep cooling air intake (recoil starter area) and muffler side of the engine at least
1 meter (3 feet) away from buildings, obstructions and other burnable objects.

 

Keep the pump away from flammables and other hazardous materials (trash, rags,
lubricants, explosives).

: OTHER SAFETY PRECAUTIONS

 

Be careful of hot parts.
The muffler and other engine parts become very hot while the pump is running or just
after it has stopped. Operate the pump in a safe area and keep children away from
the running pump.

 

Do not use diaphram pump for the mixture of water and oil.

1. SAFETY PRECAUTIONS

WARNING

Please make sure you review each precaution carefully.
Pay special attention to statement preceded by the following words.

WARNING

WARNING

WARNING

WARNING

CAUTION

“WARNING” indicates a strong possibility of severe personal injury or loss of life if
instructions are not followed.

“CAUTION” indicates a possibility of personal injury or equipment damage if instructions
are not followed.

1m

1m

PKV401T(US)̲PU2255.pmd

06.10.20, 8:09 PM

Page 2

Adobe PageMaker 7.0J/PPC

Summary of Contents for ROBIN PUMP PKV401T




















Reviews: