Subaru LEGACY, Owner'S Manual

Page: 340 / 454

Black plate (349,1)
北 米
Model "A2470BE-A" EDITED: 2010/ 3/ 24
Rear tie-down holes:
1) Rear tie-down hole
The rear tie-down holes are located near
each of the jack-up reinforcements.
WARNING
Use the rear tie-down holes only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip out
of the holes, possibly causing a
dangerous situation.
&
Using a flat-bed truck
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever into the
“
P
”
position for AT and CVT models or the
shift lever into
“
1st
”
for MT models.
2. Apply the parking brake.
3. Secure the vehicle onto the carrier
properly with safety chains. Each safety
chain should be equally tightened and
care must be taken not to pull the chains
so tightly that the suspension bottoms out.
&
Towing with all wheels on the
ground
WARNING
.
Never turn the ignition switch to
the
“
LOCK
”
position while the
vehicle is being towed because
the steering wheel and the direc-
tion of the wheels will be locked.
.
Remember that the brake booster
and power steering do not func-
tion when the engine is not
running. Because the engine is
In case of emergency
9-15
–
CONTINUED
–
9