Subaru LEGACY, Owner'S Manual

Page: 30 / 454

Black plate (31,1)
北 米
Model "A2470BE-A" EDITED: 2010/ 3/ 24
The seat heater operates when the igni-
tion switch is either in the
“
Acc
”
or
“
ON
”
position.
To turn on the seat heater, press the
“
LOW
”
or
“
HIGH
”
position on the switch,
as desired, depending on the tempera-
ture.
Selecting the
“
HIGH
”
position will cause
the seat to heat up quicker.
To turn off the seat heater, slightly press
the opposite side of the current position.
The indicator located on the switch illumi-
nates when the seat heater is in operation.
When the vehicle
’
s interior is warmed
enough or before you leave the vehicle,
be sure to turn the switch off.
CAUTION
.
There is a possibility that people
with delicate skin may suffer
slight burns even at low tempera-
tures if they use the seat heater
for a long period of time. When
using the heater, always be sure
to warn the persons concerned.
.
Do not put anything on the seat
which insulates against heat,
such as a blanket, cushion, or
similar items. This may cause the
seat heater to overheat.
NOTE
Use of the seat heater for a long period
of time while the engine is not running
can cause battery discharge.
Rear seats
WARNING
Seatbelts provide maximum re-
straint when the occupant sits well
back and upright in the seat. Do not
put cushions or any other materials
between occupants and seatbacks
or seat cushions. If you do so, the
risk of sliding under the lap belt and
of the lap belt sliding up over the
abdomen will increase, and both can
result in serious internal injury or
death.
Seat, seatbelt and SRS airbags
1-7
–
CONTINUED
–
1