Subaru Legacy 2023, Getting Started Manual

Page: 17 / 164

ADVANCED ADAPTIVE CRUISE CONTROL
1 Adaptive Cruise Control On/Off
2 Lane Centering
3 Increase Distance
4 Decrease Distance
5 Resume (RES)/Increase Speed and
Set (SET)/Decrease Speed
6 SI-Drive (if equipped)
For more information on the SI-Drive,
please refer to page 36 in this Getting Started
Guide or “Starting and Operating” in your
Owner’s Manual.
For more information on the Advanced
Adaptive Cruise Control switches, please refer
to page 98 in this Getting Started Guide or
“Advanced Adaptive Cruise Control” in your EyeSight
®
Owner’s Manual.
i SWITCH
The “i” switch and arrows allow you to cycle
through useful driving information in the
Combination Meter Display (CMD) such as fuel
consumption, driving time, speed, and tire
pressure, among others. You can change the
information displayed by using the up and
down arrows.
If there are some useful messages, such as
vehicle information or warning screens, they will
interrupt the current screen, and appear on the
display, accompanied by a beep. If such a screen
is displayed, take proper action according to the
message shown on the screen. The warning
screen will return to the original screen after a
few seconds. Important vehicle information or warning screens may be able to be displayed
when the “i” appears in the CMD. Press the “i” switch to access the important messages.
For more information about the Combination Meter Display, please refer to
“Instruments and Controls” in your Owner’s Manual.
CONTROLS
15