Subaru IMPREZA 1995, Service Manual

Page: 7 / 95

8) The table below lists the nominal sectional areas and
allowable currents of the wires.
Nominal
sectional area
mm
2
No. of strands/
strand diameter
Outside
diameter of
finished wiring
mm
Allowable
current
Amps/40°C
0.3 7/0.26 1.8 7
0.5 7/0.32 2.2 (or 2.0) 12
0.75 30/0.18 2.6 (or 2.4) 16
0.85 11/0.32 2.4 (or 2.2) 16
1.25 16/0.32 2.7 (or 2.5) 21
2 26/0.32 3.1 (or 2.9) 28
3 41/0.32 3.8 (or 3.6) 38
5 65/0.32 4.6 (or 4.4) 51
8 50/0.45 5.5 67
CAUTION:
쐌
When replacing or repairing a wire, be sure to use
the same size and type of the wire which was originally
used.
NOTE:
쐌
The allowable current in the above table indicates the
tolerable amperage of each wire at an ambient tempera-
ture of 40°C (104°F).
쐌
The allowable current changes with ambient tempera-
ture. Also, it changes if a bundle of more than two wires is
used.
G6M0203
9) Each unit is directly grounded to the body or indirectly
grounds through a harness ground terminal. Different sym-
bols are used in the wiring diagram to identify the two
grounding systems.
The ground points shown in the wiring diagram refer to the
following:
쎻
GB
Body ground
쎻
GE
Engine ground
쎻
GR
Radio ground
쎻
GD
Rear defogger ground
All wiring harnesses are provided with a ground point which
should be securely connected.
5
6-3
WIRING DIAGRAM
1. General Description