–
1 in cut
To provide wire harness access through the
liner on STI models:
1)
Fold pad in half to find pad center
2)
At rear edge of pad (edge with two
rounded corners) cut 1 inch long slit
into pad
3)
Reinstall pad to console bin
18
Perform iPod kit post installation check,
reassemble vehicle by following steps 1-7, 10 in
reverse.
For STI models, cut console bin liner as shown at
right.
For operation, consult User manual.
Rounded
corner
PART NUMBER
SPN0000267 A
ISSUE
v1.1
DATE
01/14/08
SUBARU OF AMERICA
PAGE
5/5
