PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA
4
7. With the antenna swivel point facing
towards you, move the antenna
slightly at an angle as shown. Align
router over docking station and seat
into dock (unit should snap in
smoothly). Route and tuck harness
cable behind router and antenna.
Swivel the antenna back to its upright
position. Note: once the antenna is in
the upright position it will be slightly
bent at the top as in step 9 picture
below, this is normal and will not
affect the antenna performance.
8. Wipe down area with alcohol wipe and
place harness cable clip in area as shown.
Then insert cable into clip to hold against
inner wall.
9.
When installation is complete, unit
assembly should look as shown.
Antenna
swivel point.
