PN: H001SAJ200 REV. - 3/10/10 SUBARU OF AMERICA
3
4. Align docking station over all four well
nuts, then hand-tighten all four M5 screws
with Phillips screwdriver, # 2. (Please
note the dock bottom must clear the
plastic rear cargo tray.)
5. Remove 12V DC adapter from package and
insert into back quarter-panel outlet as shown.
Make sure adapter is completely seated into the
socket.
6. Insert and attach the inline connector. Wrap
the urethane tape around the dock
connector as shown, allowing for removal
of the mating connector, if necessary.
