7
1. Lay the wiring harness alongside vehicle
harness as shown in the image.
2. Feed the unit connector of wiring harness
from the console box under the floor carpet,
and pull it out of the cutout in the carpet as
shown in the image.
3. Connect the unit connector of wiring harness
⑧
to inverter unit
⑤
.
4. Connect harness to outlet by performing the
steps in section 6(Console Outlet Mounting
Hole Processing) and 7(Outlet Installation).
5. Bundle any excess length of wiring harness
⑧
as shown in the image.
6.
Attach
wiring harness
⑧
with
tie wraps
⑩
t
o
vehicle harness in the three locations
shown in the image.
5. WIRE HARNESS INSTALLATION
Aluminum tape
Inverter
Inverter installation position
Tie wraps
Vehicle harness
Harness
Inverter installation position
FRONT
Aluminum tape
Tie wraps
Vehicle harness
Harness
300mm
Outlet connector
Harness
Vehicle harness
Air duct
FRONT
2
2
