18
OPERATING THE VEHICLE
IGNITION SWITCH
Pressing the ignition switch once with your foot off
the brake will place the ignition in “ACC” (accessory)
mode. You will be able to use the radio and
accessory power outlets.
Pressing the ignition switch twice with your foot off
the brake will place the ignition in “ON”. All electrical
systems will be available.
STARTING THE VEHICLE
Push Button Starting
To start the hybrid system:
1. Make sure the charge cable is disconnected.
2. Sit in the driver’s seat with the access key fob.
3. Make sure the select lever is in “P”.
4. Depress the brake pedal until the indicator on the ignition switch turns green.
5. While depressing the brake pedal, briefly press and release the ignition switch.
6. Check that the hybrid “READY” indicator light is illuminated in the Combination
Meter Display (CMD).
NOTE: Based on the high voltage battery state of charge or other environmental
conditions, the gasoline engine may not start.
Sights
The hybrid “READY” indicator light in the Combination Meter Display (CMD) indicates the
vehicle is ready for driving. You may not be able to hear any sound coming from the vehicle.
Sounds
You may hear a humming sound from the front of the vehicle when you move the select lever
to “R” or “D”, or the gasoline engine may start.
DRIVING THE VEHICLE
Select Lever Positions
Press the select lever button on the front of the lever
while shifting positions.
D Position (Drive)
This position is for normal driving. The vehicle systems
work together to provide a mix of performance, fuel
efficiency, and high voltage battery management.
3540337_19a_Subaru_Crosstrek_Hybrid_Quick_Guide_091818.indd 18
9/18/18 3:52 PM
