14
CONTROLS
I/SET SWITCH
Use the controls to display and switch
selected items in the Combination
Meter Display (CMD). Pulling and
holding this switch will access the
menu. Pulling the arrows will move up
or down the menu.
LIGHT CONTROLS
1
High Beams:
Push the lever
forward to change from low beam
to high beam. This may also
activate High Beam Assist (HBA).
Pull the lever back to center to
return to low beam.
2
Headlights:
Rotate the dial to
turn on the headlights, instrument
panel lights, parking lights, tail
lights and license plate lights.
3
Running Lights:
Rotate the dial
to turn on the instrument panel
lights, parking lights, tail lights, and license plate lights.
4
AUTO:
If equipped, rotate the dial to automatically turn the vehicle’s lights on or off,
depending on the level of outside light.
5
Fog Lights:
If equipped, rotate the dial to turn on the fog lights.
While the light switch is on, rotating the
dial downward to dim the instrument panel
illumination. Rotating the dial upward will
make the illumination brighter. When the
dial is fully rotated upward (dots aligned),
the instrument panel illumination stays at
full brightness.
1
2
3
4
5
3540337_19a_Subaru_Crosstrek_Hybrid_Quick_Guide_091818.indd 14
9/18/18 3:52 PM
