Subaru 2015 WRX STI, Owner'S Manual

Page: 348 / 514

the
“
AUTO [+]
”
mode. After setting the
mode,
“
AUTO [+]
”
appears.
Pull the control switch rearward to select
the
“
AUTO [
−
]
”
mode. After setting the
mode,
“
AUTO [
−
]
”
appears.
When the
“
AUTO [+]
”
mode is selected,
pull the control switch rearward to change
to the
“
AUTO
”
mode. When the
“
AUTO
[
−
]
”
mode is set, push the control switch
forward to change to the
“
AUTO
”
mode.
&
Manual mode
In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the
“
AUTO
”
indica-
tor disappears.
!
Center differential control switch
and indicator
The control switch is located beside the
parking brake lever. By pushing the
control switch forward or pulling it rear-
ward, it is possible to change the initial
LSD torque.
The center differential indicator on the
combination meter gives six levels of
indication. The indicator and control
switch are linked; when the switch is
pushed or pulled to change the initial
LSD torque, the indicator changes accord-
ingly.
Starting and operating/Driver
’
s Control Center Differential (C.DIFF/DCCD) (STI)
7-21
–
CONTINUED
–