Subaru 2015 WRX STI, Owner'S Manual

Page: 174 / 514

&
Basic screens
These are the basic screens of the multi
function display.
Item Page
Information bar 3-49
Boost pr accelerator
opening ratio screen
3-50
Fuel consumption screen 3-51
ECO history screen 3-51
Vehicle activation status
screen
3-52
Triple meter screen 3-53
Guidance screen 3-53
Clock/calendar screen 3-54
Audio screen (if equipped) 3-54
By operating the
“ ”
or
“ ”
of the control
switch, you can switch the screen that is
always displayed. Also, when the
button is pushed and held, the selection
screen can be displayed. For details about
the selection screen, refer to
“
Selection
screen
” F
3-56.
!
Information bar
1) Information bar
2) Outside temperature indicator
3) Top display
4) Clock
While the ignition switch is in the
“
ACC
”
or
“
ON
”
position, the outside temperature
indicator, clock, etc. will be shown on the
information bar.
!
Outside temperature indicator
This displays the outside temperature
between
−
40
8
F (
−
40
8
C) and 122
8
F
(50
8
C).
Icy road surface warning screen
When the outside temperature becomes
37
8
F (3
8
C) or less, the icy road surface
warning screen interrupts to inform the
driver that the road surface may be frozen.
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.
.
The icy road surface warning screen
should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.
.
Once the icy road surface warning
screen is displayed, it will not be
displayed again unless the outside
Instruments and controls/Multi function display
3-49
–
CONTINUED
–