Subaru 2014 Forester Owner'S Manual Download Page 296

Page: 296 / 546

NOTE

The Bluetooth

audio function may

not operate properly under the follow-
ing conditions.

–

The device is turned off.

–

The battery of the device has run

down.

–

The device is not connected to

the system.

–

The device is behind the seat or

in the glove box.

–

A metal material is covering or

touching the device.

Depending on the type of device that

is used, operation and sound volume
may be different from normal use of
those devices.

The sound quality may degrade due

to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.

When another Bluetooth

device is

simultaneously connected, noise may
be heard.

Media format

Bluetooth

audio devices cannot be

connected if they are not compatible with
the following

Bluetooth

profiles.

A2DP (Advanced Audio Distribution

Profile)

AVRCP (Audio/Video Remote Control

Profile)

Setting Bluetooth

audio

NOTE

For models with the multi function
display, Bluetooth

audio can be set

via the multi function display. For
details, refer to

“

Bluetooth

audio

setting

”

3-83.

“

”

button

“

TRACK

”

dial (type

A, B, C and D audio)

“

TRACK

”

dial (type

E audio)

1. Select the

“

BT-A SETUP

”

menu by

pressing the

“

”

button. For details,

refer to

“

Other settings

”

5-10.

2. Perform the following procedure by
operating the

“

TRACK

”

dial while

“

BT-A

”

displayed.

NOTE

You cannot set Bluetooth

audio while

driving.

Registering (pairing) device

NOTE

Only one device can be registered. If
you want to register another device,
delete the previously registered device
and then perform the registering pro-
cedure. For details about deleting a
device, refer to

“

Deleting device

”

38.

1. Select the

“

PAIR AUDIO

”

menu.

–

If a device is already registered,

“

MEMORY FULL

”

will be displayed

and the mode will change to the

Bluetooth

audio setting mode.

2. After the passkey is shown on the
display, input the passkey into the device.

–

If you input the correct passkey,

“

PAIRED

”

will be displayed and the

registration procedure will be finished.

–

If you input an incorrect passkey,

“

FAILED

”

will be displayed, the regis-

tration procedure was not successful
and the mode will change to the

Bluetooth

audio setting mode.

Audio/Bluetooth

audio

5-37

–

CONTINUED

–

Summary of Contents for 2014 Forester



































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Forester

Reviews:

Related manuals for 2014 Forester

Brands by name

Popular brands

Subaru 2014 Forester, Owner'S Manual

Search results

Summary of Contents for 2014 Forester

Reviews:

Related manuals for 2014 Forester

Brands by name

Popular brands