Subaru 2014 Forester, Owner'S Manual

Page: 119 / 546

2-22
Keys and doors/Alarm system
–
The ignition switch is turned to
the
“
ON
”
position (models without
“
keyless access with push-button
start system
”
).
–
Push-button ignition switch is
turned to the
“
ACC
”
position (mod-
els with
“
keyless access with push-
button start system
”
).
!
To arm the system using the access
key/remote transmitter
1. Close all windows and the moonroof (if
equipped).
2. Remove the key from the ignition
switch (models without
“
keyless access
with push-button start system
”
)/turn the
push-button ignition switch to the
“
OFF
”
position (models with
“
keyless access with
push-button start system
”
).
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close all doors and the rear gate.
Access key
1) Arm button: Press to arm the system
2) Disarm button: Press to disarm the
system
Transmitter
1) Arm button: Press to arm the system
2) Disarm button: Press to disarm the
system
6. Briefly press the arm button (for less
than 2 seconds). All doors (and the rear