Black plate (291,1)
一
般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
!
AT and CVT models
1)
Operation indicator
2)
Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the brake pedal,
the engine will start. The starting proce-
dure of the engine is as follows.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the select lever in the
“
P
”
posi-
tion. The engine can also start when the
select lever is in the
“
N
”
position, however,
for safety reasons, start in the
“
P
”
position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When starting
with the select lever in the
“
N
”
position, the
indicator does not turn green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
.
In case the engine does not start by
the normal engine start procedure,
move the select lever to the
“
P
”
posi-
tion, and switch the power to
“
Acc
”
.
Depress the brake pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
.
When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button
ignition switch turns green, and press
the push-button ignition switch to start
the engine.
.
For non-turbo models, to protect the
engine/transmission while the select
lever is in the
“
P
”
or
“
N
”
position, the
engine is controlled so that the engine
speed may not become too high even if
the accelerator pedal is depressed
hard.
&
Stopping engine
1. Stop the vehicle completely.
2. Move the select lever to the
“
P
”
position (AT and CVT models).
3. Press the push-button ignition switch.
The engine will stop, and the power will be
switched to
“
OFF
”
.
WARNING
.
Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is pressed for 3 seconds
or longer, the engine will stop.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater
force will be required to steer,
and it may result in an unex-
pected accident.
.
If the engine stops during driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
Starting and operating
7-15
–
CONTINUED
–
7
