Black plate (203,1)
一
般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
!
A/C
–
Air conditioner button
If the windshield starts to fog when the
climate control system is operated in the
AUTO mode, press the air conditioner
button
“
A/C
”
to defog and dehumidify.
When this button is pressed, the air
conditioner compressor turns on and the
indicator light
“
A/C
”
on the display illumi-
nates. To turn off the air conditioner
compressor, press the
“
A/C
”
button again.
NOTE
The air conditioner compressor does
not operate when the outside air tem-
perature is below 0
8
C (32
8
F).
!
Airflow mode selection button
Select the desired airflow mode by press-
ing the airflow mode selection button. The
selected airflow mode is indicated on the
display.
There are four airflow modes that activate
the following air outlets.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and
foot outlets
(Heat): Foot outlets, both side outlets of
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and
both side windows to prevent fogging.)
(Heat-def): Windshield defroster out-
lets, foot outlets and both side outlets of
the instrument panel
NOTE
When the
“ ”
mode is selected, the air
conditioner compressor automatically
operates to quickly defog the wind-
shield. At the same time, the air inlet
selection is automatically set to the
“
OFF
”
position (outside air mode).
!
Air inlet selection button
Select airflow by pressing the air inlet
selection button
“
”
.
ON position (recirculation):
Interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
for fast cooling with the air conditioner or
Climate control
4-9
–
CONTINUED
–
4
