Subaru 2011 Outback, Owner'S Manual

Page: 182 / 495

Black plate (187,1)
一 般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
&
Rear window wiper and
washer switch (Station wa-
gon)
The wiper operates only when the ignition
switch is in the
“
ON
”
position.
: Washer (accompanied by wiper operation)
ON: Continuous
INT: Intermittent
OFF: Off
: Washer
!
Rear wiper
To turn the rear wiper on, turn the knob on
the end of the wiper control lever upward
to the
“
INT
”
or
“
ON
”
position.
To turn the wiper off, return the knob on
the end of the lever to the
“
OFF
”
position.
With the switch turned to the
“
INT
”
position, the rear wiper will operate inter-
mittently at intervals corresponding to the
vehicle speed (longer when the vehicle
speed is low; shorter when the vehicle
speed is high).
When you subsequently move the select
lever to the
“
R
”
position (AT and CVT
models) or the shift lever to the reverse
position (MT models), the rear wiper will
switch to continuous operation. When you
move the select lever/shift lever from the
“
R
”
/reverse position to another position,
the rear wiper will return to intermittent
operation.
!
Washer
To wash the rear window while the rear
wiper is operating, turn the knob on the
end of the wiper control lever upward to
the
“ ”
position. The washer fluid sprays
until you release the knob.
To wash the rear window when the rear
wiper is not in use, turn the knob on the
end of the wiper control lever downward to
the
“ ”
position. The washer fluid sprays
and the wiper operates until you release
the knob.
NOTE
When the amount of washer fluid is
getting low, the rear washer fluid will
first be stopped. This means that the
amount of washer fluid is low, and it
should be added immediately.
Instruments and controls
3-55
3