Subaru 2010 Impreza, Owner'S Manual

Page: 132 / 420

*:
“ ”
or
“ ”
cannot be displayed when
the ignition switch is in the
“
ON
”
posi-
tion.
To change the current setting, press the
trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
Your vehicle
’
s initial movement setting
of the meter/gauge needles has been
set for activation
“ ”
at the time of
shipment from the factory.
&
Speedometer
The speedometer shows the vehicle
speed.
&
Odometer/Trip meter
1) Trip knob
This meter displays the odometer and two
trip meters when the ignition switch is in
the
“
LOCK
”
,
“
Acc
”
or
“
ON
”
position.
If you press the trip knob when the ignition
switch is in the
“
LOCK
”
position, the
odometer/trip meter will light up. It is
possible to switch the indications while
the odometer/trip meter is lit up. If you do
not press the trip knob within 10 seconds
of illumination of the odometer/trip meter,
the odometer/trip meter will turn off.
The display can be switched as shown
below by pressing the trip knob.
*:
“ ”
or
“ ”
cannot be displayed when
the ignition switch is in the
“
ON
”
posi-
tion.
For the
“ ”
or
“ ”
indication, refer to
“
Canceling the function for meter/gauge
needle movement upon turning on the
ignition switch
” F
3-12.
Instruments and controls
3-13
–
CONTINUED
–