Page 22
Component Removal
OUTDOOR B
BBQ G
GRILLS
Spark Electrode Mounting Bracket
The spark electrode mounting bracket is used to mount
the spark electrode to the pilot burner tube. To remove
the spark electrode mounting bracket you will need to
remove the open top burner grates, spark electrode
ground strap and spark electrode. Now extract the
screw for the spark electrode mounting bracket and
remove the spark electrode mounting bracket from the
pilot tube and the burner support bracket.
Pilot Tube and Bracket
The pilot tube bracket allows gas to flow from the front
and rear open top burners to the spark electrode, which
will produce the flame for the burners once a spark has
been produced from the rotary igniters. To remove the
pilot tube bracket you will need to remove the open top
burner grates and the spark electrode with mounting
bracket. Now extract the screw that mounts the pilot
tube to the support bracket and remove the pilot tube.
Burner Support Bracket
The burner support bracket is used to support the open
top burners. To remove the burner support bracket you
will need to remove the open top grates, the front and
rear venturi and the step-up frame. Now unplug the
spark electrode from the rotary igniter by reaching down
along the open top burner valve and unplugging it from
the rotary igniter. Cut any wire ties that secure the
electrode wire and extract the two screws at the front of
the burner support bracket and remove. Now lift the
bracket up while pulling the bracket forward to disen-
gage the tab of the support bracket from slot in the
open top frame.
Fig. 4-9
Fig. 4-10
Fig. 4-11