background image

EN-7

is found in the process of use, please contact the after-sales 
service. Do not disassemble and repair it by yourself.

Waste Disposal

Damaged detector and its accessories shall be recycled in 
compliance with the state environmental protection requirements.

Product Specifications

Maximum detection depth:

 Ferrous metal (iron pipe with a minimum diameter of 3cm): 80mm

 Nonferrous metal (aluminum with a minimum volume of 

   30cm*2cm*2cm): 80mm

 Live wire (input: 110-380V, 50-60Hz): 50mm

 Wood (with a minimum volume of 20cm*16cm*4cm): 20mm

Operating temperature: 0-40°C
Storage temperature: -10-50°C
Temperature for guaranteed precision: 18-28°C

Humidity: ≤75%
Altitude: ≤2000m

Pollution degree: 2
Auto power-off time: 5 minutes
Battery: one alkaline battery of 9V (6LR61)
Low battery voltage warning: around 7.2V 
Silent mode: Yes

Attention:

 Detection depth may vary depending the moisture 

content in wood, wall surface material (such as steel, aluminum, 

magnetic and shielded material), and the size of target object, etc. 

The larger the targeted object, the deeper the unit could detect. The 
wetter the wood object, the deeper the unit could detect.

Summary of Contents for UT387B











Reviews: