In this menu you can store the positions of
Desired satellites if you are using a
DiSEqC 1.2 actuator system.
Select Satellite: To select the satellite.
Select TP: to select a TP corresponding to
the satellite, to measure the signal strength.
Adjust East/West: To adjust the dish position
for the best Signal strength.
Move East/West: To move the dish position for the
best Signal strength.
Limit Setup: In this sub menu you can set the East/West limits, clear limits and refer to
references.
Store position: To store up to max. 40 sat positions of the selected satellites.
Auto-Calculation: If one satellite position is fixed, enable this function and 21
preprogrammed satellite positions will be automatically calculated and set. This
Auto-Calculation function is only working if a DiSEqC 1.2 actuator is connected.
In this menu you can set the position of your receiver
position and satellites if you are using a USALS system.
Select Satellite : To select the satellite.
SAT Position : To change a global position of satellite.
Select TP : To select a TP corresponding to the
satellite, to measure the signal strength.
Latitude : To change a latitude of receiver position.
Longitude : To change a longitude of receiver position.
Move East/West:: To move the antenna to a calculated
position of selected satellite using USALS system.
Reference position: To move the antenna to reference position (to ‘0’).
DiSEqC1.2 positioner
USALS positioner
