ASSEMBLY INSTRUCTIONS
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
Plug the Power Cord into a 240v outlet.
Make sure no obstacles are in the desk's path.
Make sure the desktop is not touching any walls.
Make sure all cords are appropriate length to accommodate the change in height
IMPORTANT: You must RESET the desk prior to use.
Height
Range
Base
width
Travel Speed
Weight capacity
Duty Cycle
60CM-125CM(without desktop)
110CM-180CM
38 per second(no load)
1 0kg
8
10%. Max. 2 mins on, 18 mins off
Soft start/stop
Adjustable leveling studs
4 Memory presets
STEP8
Page8
IF your desk is not functioning properly it may need to be reset. Unplug the power cord for 20 seconds.
Plug the power cord back in and follow the RESET procedure outlined in step 8.
IF the LED readout displays “Er8" or "Er9" or "Er00"confirm that all wired connections are secure
(legs to cables, cables to control box). Then perform the reset procedure outlined in step 8.
IF the error message persists after the reset procedure, contact your seller
.
IF the height between the legs exceeds 4cm
,
perform the reset procedure outlined in step 8
.
IF the handset displays
“
HOT
”
，
let the base cool down for 20 minutes.
RESET PROCEDURE: Push and hold the DOWN button on the Programmable Handset (Part #7) the
LED reads “RST”
until the desk reaches its lowest height, slightly rises and stops. Release the DOWN button.
Your desk is now ready to use.
To program up to four presets: Use the up/down buttons to find a desired height, then press "S"(or “M”)
followed by a number 1 - 4.
CAUTION: Once a preset button is pushed, the desk will move to the programmed height .
