ASSEMBLY INSTRUCTIONS
Page4
Lay out all components and hardware to ensure that you have all components and hardware listed on the
parts page.
Fully separate the Crossbar Ends (Part #1). You will find the Crossbar Center Rails (Part #4) inside.
STEP1
Place one of the Legs (Part #2) into the Crossbar End (Part #1)
Line up the holes on each Leg (Part #2) with the holes on each
Crossbar End (Part #1)
Using the supplied Allen Wrench, insert four (4) M6x12 Machine
Screws (Part #11) through the holes in each Crossbar End (Part #1) going
into the Leg (Part #2) and rotate each screw just a few turns.
You will need to dip the assembly over to gain access to all four (4) M6x12
Machine Screws (Part #11).
STEP2
