8
OPERATING INSTRUCTIONS (CONTINUED)
• Press and hold the HEATER ICON for 10 seconds to engage the heater function. Press and
hold the HEATER ICON for 10 seconds again to disengage the heater function. (See HEATER
OVERRIDE section below for more details).
Note:
This option is only available if using the control panel.
•
If the flame and ember bed brightness are off before the heating function is turned on, after turning
on the heat, the flame and ember bed brightness is slightly light on by default.
•
When the heating function is turned on for the first time, the temperature unit is set to 82°F by
default.
Increase/Decrease Button
Note:
This option is only available if using the remote control.
• Press the INCREASE/DECREASE button to adjust the heater’s thermostat setting.
• Press the INCREASE/DECREASE button again to scroll up through the pre-set temperature
settings: The thermostat setting range is 64°F (18°C) to 82ºF (27°C), ON. (FA is a fan function. The
fan works normally, but the heater does not work.)
• Set the temperature to “ON” to have the heater run continually.
Timer Function
• Press the TIMER ICON to set the countdown for the unit’s main power.
• Press the TIMER ICON again to scroll through the timer settings, which are: 1H, 2H, 3H, 4H, 5H,
6H, 7H, 8H, OFF. (The default is 8H.).
• After setting the timer time, if you press POWER ICON, it will turn off the timer and enter standby.
HEATER OVERRIDE
The power to the heater can be disengaged to prevent the heater from being accidentally or unintentionally
powering on. This feature is primarily added to help prevent children from powering on the heater when it is
not desired.
•
To enable the heater override function press and hold HEATER ICON for 10 seconds. The flame and ember
bed brightness will flash 6 times quickly, indicating that the lock is successful. When the heat is locked,
press the HEATER ICON, the ember bed brightness will flash 6 times to remind the user that the heat is
locked.
•
To unlock the heater function, press and hold the HEATER ICON for 10 seconds. The flame and ember bed
brightness will flash 6 times quickly. The heater function is now engaged. By pressing the HEATER ICON
again you will be able to adjust the heat temperature to your desired temperature.
MEMORY FUNCTION
This unit has a memory function that allows you to turn off the MAIN POWER and retains all the other function
settings (excluding the TIMER function).
• When the unit’s main power is OFF, press the POWER ICON once on the insert control panel or on the
remote control to power the unit ON and “wake up” the individual function at the last setting. Press the icon
again to adjust it and press the main POWER ICON on the insert or on the remote control to turn the unit
OFF and save the new setting into memory.
• When the unit is powered ON, the LED readout will show the saved temperature setting. If a temperature
setting was not saved, it will show the flame brightness setting saved in memory. If neither one has a setting
saved to memory, then only the ember bed will glow (as a power light indicator).
• Another way to reset the memory is to unplug the unit from the wall.
