- 5 -
CONNECT THE STX JUICER ATTACHMENT
TO THE STX MEAT GRINDER
The STX Juicer Attachment
ONLY
works with the
STX MegaForce and STX TurboForce
.
It does
NOT
work with the STX TurboForce II or
any other STX Meat Grinders.
1. Ensure that the STX Meat Grinder is turned off and unplugged prior
to attaching the STX Juicer Attachment to the STX Meat Grinder.
2. The assembled STX Juicer can be fitted to the STX Meat Grinder
by removing the grinding head of the STX Meat Grinder (See the
Owner’s Manual for the STX Meat Grinder for instructions).
3. Insert the Juicer Housing into the STX Meat Grinder. The STX Juicer
Attachment has two male locking tabs that insert into 2 female slots
of the STX Meat Grinder. The Juicer Auger has a male gear that
also aligns with the female slot on the drive shaft of the STX Meat
Grinder. These components align quite easily but sometimes it may
be necessary to slightly rotate the STX Juicer Attachment clockwise
and counter clockwise to align all components. The Juicer housing
will fit flush with the front of the STX Meat Grinder when correctly
attached.
4. Now simply tighten the Grinding Head Knob hand tight, so that the
STX Juicer Attachment is firmly in place. Removal of the STX Juicer
Attachment is completed by simply loosening this same Grinding
Head Knob and removing the STX Juicer Attachment. Do NOT
overtighten.