- 3 -
- 3 -
15. Always monitor the grinder during use. Do NOT leave unattended.
It is recommended that after 10-15 minutes of continual use,
the unit should be allowed to cool for a few minutes to prevent
overheating.
16. Do not jam (referred to as “Hogging”) meat into the grinder with
excessive force.
17. Allow Auger to completely stop before changing the grinder
settings from ON I or II to Reverse (and vice versa). Rapid
changes in auger direction could damage the motor.
18. Do not plug another high wattage appliance into the same outlet
as this product.
19. Meat preparation and temperature are very important for optimal
performance and results. Read the Meat Preparation section
before using.
20. CHECK THAT THE GRINDING BLADE IS INSERTED
CORRECTLY prior to use. See Correct/Incorrect Cutting Blade
Assembly photos below.
21. Always check the condition of the power cord prior to use.
If there is any evidence of damage or fraying of the power
cord discontinue use and contact STX International for OEM
replacement. (See Contact Information on the back of this
manual) STX International will only use original OEM parts when/
if replacement is necessary. See warranty in the back of the
manual.
22. Any alteration of this meat grinder’s components, substitution of
other manufacturer’s components to this unit, or any repairs to
this grinder not completed or authorized by STX International will
immediately void the warranty.
CORRECT
YES!
INCORRECT
NO!
Correct/Incorrect Cutting Blade Assembly
