- 5 -
CLEANING
1. Clean the racks and interior of the cabinet before using the
dehydrator for the first time and after each use.
2. Allow unit to cool before cleaning. Turn the power switch to the OFF
position and ensure the electrical cord is unplugged from the outlet.
3. Wipe off both exterior and interior surfaces with a damp cloth and
mild dish soap. Be careful not to splash water onto the heating
element (located behind the screen inside the cabinet at the back.)
DO NOT immerse the dehydrator in water.
4. The dehydrator shelves are dishwasher safe. Be certain ALL parts
are completely dry before plugging in and powering up the product.
SETUP INSTRUCTIONS
Before starting the dehydrator:
•
Place the dehydrator on a clean, dry surface. The area should be
well ventilated away from flammable items.
•
The dehydrator should be at least 12” from any wall during
operation to allow for proper air circulation. DO NOT block the air
vents at the rear or on the door of the dehydrator.
•
Ensure that the dehydrator is plugged into a properly grounded
power outlet,
•
Always monitor this device when operating and observe all fire
safety procedures including the availability of fire extinguishing
devices.
Summary of Contents for Dehydra 1200W-XLS
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
Page 3: ...1 PARTS AND PLACEMENT CAUTION EDGES MAY BE SHARP...
Page 14: ...12...