Page 4
14
5-Pin Connector
This male connector connects wires from PLC’s and other line control
devices to the pins on the mating receptacle on the TCV. The system is
designed to work with 24VDC I/O devices.
15 9-Pin Serial Convertor
This device attaches to the serial port on the computer that will run
the software used to program the TCV. It permits use of the sup-
plied serial cable to connect to the TCV when programming the
unit.
16 Serial Cable
This cable connects the RS232 port to the 9-Pin Serial
Convertor to the computer when programming the unit.
17 Power Cable
The Power Cable connects the TCV to the electric
power source. This is a standard pc-type cable, and any
cable of this type with a rated capacity of 120 VAC and
10 Amperes may be used.
18 TCV Software
The TCV software is supplied on the enclosed cd. It must be installed on
the computer that will be used to program the TCV before the TCV can
be programmed and used.
2 Domestic (USA) Warnings
INSTRUCTION TO THE USER
This equipment has been tested and found to comply with the limits for a class B digital
Contains FCC ID: OUR-XBEE
The enclosed devise complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may cause
delayed operation.
Summary of Contents for TCV
Page 3: ......