background image

3

BACK

AV Stumpfl GmbH | Mitterweg 46 | 4702 Wallern

[email protected] | www.AVstumpfl.com | +43 7249 42811

We reserve the right to make modifications in the interest of technical progress.

GENERAL

STANDARDS, REGULATIONS AND 

TECHNICAL SPECIFICATION

This projection screen is in accordance with the safety regulations in DIN standard 19045 and 

DIN 56950. The screen fabric is comply with DIN 4102 part 1 and the specifications of the according 

data sheet. For the technical details and projection-specific material parameters please refer to the 

corresponding product data sheet: 

www.AVstumpfl.com/projectionmaterials

Detailed data of frame components, legs and projection surface can be found on the type labels on 

each component and on the labeled soft bags, roller bags or flight cases. 

SAFETY

GENERAL INFORMATION FOR THE MANUAL AND SAFETY

This operating manual forms part of the projection screen system and enables a safe and efficient 

operation. The safety section provides information about important safety aspects for the protection 

of persons, frame and projection materials. Task-related warnings/notes are also contained in the 

individual chapters. Read instructions through completely before proceeding and keep for future 

reference. You can find manuals electronically on our website: 

www.AVstumpfl.com/downloads

PACKAGING MATERIAL

WARNING

Danger of suffocation!

• 

Keep packaging material and foils away from children.

• 

Do not let children play with packaging material.

Unpack without cutter or any other sharp tool to avoid 

damaging of the projection screen. Remove packaging materials 

by hand. Unpack projection surface after assembling of the frame.

Summary of Contents for VARIO CURVE











Reviews: