manualshive.com logo in svg
background image

www.elumenati.com

i  [email protected]

 

 

Elumenati OmniFocus 200 Series

 

Installation and Operation Guide

Last updated: 

November 2012

This document applies to the OmniFocus 3020 and 30210 sold after January 2013. 
For all previous 200 Series products please refer to the “OmniFocus 200 Series 

pre2013” manual.

For brevity, we refer to the 200 Series throughout. Differences are noted where applicable.

Elumenati OmniFocus 200 Series .................................................................................1
Installation and Operation Guide..................................................................................1

200 Series Overview...................................................................................................2

Introduction...........................................................................................................2

Equipment List.......................................................................................................2

200 Series Setup........................................................................................................3

Projector Connection...............................................................................................3
Lens Installation.....................................................................................................4

First Light..............................................................................................................5
Projector Settings Adjustment..................................................................................5

Stand Assembly (Optional)......................................................................................7

200 Series Information...............................................................................................8

Maintenance..........................................................................................................8
Troubleshooting......................................................................................................8

Product Support.....................................................................................................8

200 Series Product Specifications.................................................................................9

Immersive Projection Design - 

www.elumenati.com

 

Elumenati, GeoDome OmniFocus and OmniMap are all trademarks of The Elumenati LLC.

Содержание OmniFocus 200 Series











Отзывы: