18
EN/05.2019 © STULZ GmbH – all rights reserved
CYBERHANDLER 2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Assembly sequence:
Aluminium profiles
• Insert first the M8 nuts in the joining element and then insert the M8 x 30 mm socket cap
screw in the other part of the fixing element.
• Tighten the screw with the Allen key
• Baseframe:
• Insert first the M8 x 30 mm Hex-head cap screws in the fixing element of the baseframe and
secure it with the M8 nuts.
Fig 6-8: Assembly of modules
Fig 6-9: Assembly of baseframe
Screws/nuts
Fixing element
Module 1
Module 1
Module 2
Module 2
6 3
Assembly (units in several parts)
Before assembling the modules, check the following points:
• Every module must be placed in its final position according to the unit drawing (Every module
is named after a letter). To ensure a correct tightness between 2 modules, every module is
provided with rubber strip in factory.
• All fixing elements, drilled holes are perfectly placed in order all the modules can be fixed
together.
