3
4. Input/Output Features
Rear Panel
1
.
AC Inlet & Fuse Holder:
Use the supplied AC cord to connect the unit to AC mains. Make sure voltage and
frequency stated on the unit matches with your local AC supply. The fuse can be accessed by the small drawer at
the AC inlet. To change the fuse, unplug the AC cord first, pull out the fuse drawer and replace the fuse ONLY with
a fuse of same voltage and rating. If the fuse blows again after replacement, hand over the unit to qualified service
personnel.
2.
Switches the unit on and off.
Power switch:
3.
This Unbalanced Stereo RCA master output can be used to connect to an amplifier, powered
speakers etc. The output level is controlled by Master channel knob. (See Pt. 10 Front Panel)
Master RCA Output:
4.
This unbalanced stereo RCA can be used to connect a personal monitor in the DJ booth.
The output level is controlled by the booth output rotary control. (See Pt. 11 Front Panel)
Booth Stereo Output:
5.
These RCA connectors provide inputs for line-level signals from CD Players,
Tape Decks, DVD players etc.
Line Inputs:
MP3 players, iPod’s,
6.
This 1/4” Stereo jack socket input is provided to connect a microphone using a Balanced cable.
Mic Input:
1
2
3
4
6
5
Summary of Contents for DJX 325
Page 6: ......
