9
For assembling, refer to the figure & procedure below.
Tighten 4 supplied M12X60 bolts with plain washers, spring washers and nut securely to fix each Suspension Bracket to the Fly bar.
•
Fix Inner Joining Plate Small (SMLSSSKS005) on front side & Inner Joining Plate Big (SMLSSSKS004) on back side to Suspension brackets
•
by 20mm Locking pin (SSLSSSKP006). Inner joining plate small can also used on rear. It gives 4.5° vertical inclination (downward).
FINISHED ASSEMBLY DIAGRAM OF FLY BAR
8.2 Fly bar Assembly
Use only shackle holes for suspension of array!
A :- M12x60 HEX BOLT SMLSSSKS010 (4 NOS.)
B :- SUSPENSION BRACKET SMLSSSKS006 (4 NOS.)
C :- LOCKING PIN SMALL (20MM) SSLSSSKP006 (4 NOS.)
D :- INNER JOINING PLATE BIG SMLSSSKS004 (2 NOS.)
E :- INNER JOINING PLATE SMALL SMLSSSKS005 (2 NOS.)
F :- FLY BAR SSLSSSKP010 (1 NO.)
G :- M12x10 HEX NUT SMLSSSKS007 (4 NOS.)
H :- M12 SPRING WASHER SMLSSSKS008 (4 NOS.)
I :- M12 PLAIN WASHER SMLSSSKS009 (8 NOS.)
A
B
C
D
E
F
G
H
I
